Product Details
Characteristic
● The machine introduction & absorption of European technology / process manufacturing, supporting / full functional.
● After mounting the plate and registration, no longer need registration, improve yield.
● The machine first mount plate, pre-trapping function, to be completed in advance prepress trapping in the shortest possible time.
● The machine is equipped with blower and heater, and the heater employed central temperature control system.
● When machine stop, Tension can be maintained, the substrate is not deviation shift.
● The individual drying oven and cold wind system can effectively prevent the ink adhesion after printing.
● With precision structural, easy operation, easy maintenance, high degree of automation and so on, only one person can operate.
TECHNICAL SPECIFICATIONS |
Model |
CHCI8-600E |
CHCI8-800E |
CHCI8-1000E |
CHCI8-1200E |
Max. Web Width |
650mm |
850mm |
1050mm |
1250mm |
Max. Printing Width |
550mm |
750mm |
950mm |
1150mm |
Max. Machine Speed |
180m/min |
Printing Speed |
120m/min |
Max. Unwind/Rewind Dia. |
φ1200mm |
Drive Type |
Gear drive |
Plate thickness |
Photopolymer plate 1.7mm or 1.14mm (or to be specified) |
Ink |
Water base ink or solvent ink |
Printing length (repeat) |
300mm-1200mm |
Printing way |
4+4.4+3.4+2.4+1.4+0 Full width. Both side |
Range Of Substrates |
PP Woven |
Electrical supply |
Voltage 380V. 50 HZ.3PH or to be specified |
Double Station Unwinding
◆ Center-driven unwinding, equipped with magnetic powder brake, equipped with automatic tension control.
◆ Tension control: Ultra-light floating roller control, automatic tension compensation, closed loop control; (Low-friction cylinder position detection, precision pressure regulating valve control, automatic alarm or shutdown when the coil diameter reaches the set value).
◆ It has the function of automatic shutdown when the material is interrupted, and the tension maintains the function to avoid the substrate slack and deviation during the shutdown.
◆ The outer diameter of the air expansion shaft is 3 inches, and the clamping method of the air expansion shaft is a 2-head cylinder release type.
◆ Configure automatic EPC system before printing.
◆ EPC: Before printing, a four-roller automatic EPC ultrasonic probe correction system has manual/automatic/center return functions, and the left and right translation can be adjusted by ±65mm.
Printing Unit
◆ Type: CI Flex Printing Machine
◆ Color: 4 colors on the front + 4 colors on the back
◆ Drive mode: Servo gear drive
◆ Motor: Servo motor drive, inverter control closed loop control
◆ Printing method: Photosensitive resin plate, suitable for both water-based and alcohol-soluble inks
◆ Printing Repeat: 400-1200mm
Double Station Rewinding
● Double-station Surface friction winding, Equipped with servo cutter, stable segment length.
● The tension control adopts ultra-light floating roller control, automatic tension compensation, closed-loop control, and arbitrary setting of taper tension (low-friction cylinder position detection, precision pressure regulator control, automatic alarm or shutdown when the roll diameter reaches the set value).
● It has the function of automatic shutdown when the material is interrupted, and the tension maintains the function to avoid the substrate slack and deviation during the shutdown.
http://www.chflexoprinting.com/