Product Details
Introduction
EPS concrete sandwich wall panel is a new designed green construction material, it is lightweight, fireproof, energy saving, sound proof, insulated, warm preservation, save cost and time on installation. Surface is maken of calcium silicate board or reinforced calcium silicate board, core is filled with cement, EPS ( Expanded Polystyrene foam ), sand, forming by one time compound.
Specification
Length (mm)
|
Width (mm)
|
Thickness (mm)
|
Density (kg/m2)
|
Usage
|
Application
|
Appearance
|
2270 2440 2700
|
610
|
50
|
42±2
|
Roof
|
All kind of buildings
|
1. calcium silicate board as surface board 2. EPS foam + cement + sand as core, 3. 100% non-asbestos
|
60
|
46±2
|
Roof/Interior wall
|
75
|
50±2
|
Interior wall
|
90
|
57±2
|
Interior wall
|
100
|
62±2
|
Interior/Exterior wall
|
120
|
72±2
|
Exterior wall
|
150
|
85±2
|
Exterior wall
|
180
|
100±2
|
Exterior wall
|
Minimal order quantity is 20ft container as trial order.
Technical Performance Indicators (View Certifications and Test Reports)
Advantage
● Lightweight and economy
The core material of EPS concrete sandwich wall panel is filled with lightweight EPS. The volume-weight is about 600-800 kg/m3. Freely plastering and the weight is only around 25 percent of the traditional wall.
● Energy-saving, environment-friendly
EPS concrete sandwich wall panel is green and environment-friendly, non-harmful substance, no radiation, reusable, no construction waste, widely used in various places.
● Fireproof,Waterproof and wetproof
The non-inflammability of the Ojunda EPS concrete sandwich wall panel reach level A standard. Under the high temperature of 1000 degrees, the fireproof feature can last 4 hours, do not radiate toxic gasses.
It also has supper waterproof performance, The tests show that the material has good waterproofness and dampproof. Ojunda material can be used in the wet area such as kitchen, toilet, and basement.
● Anti-pressure, anti-quake and anti-impact
Because of fabricated construction, 3-in-1 structure and using tongue and groove to join panels, the anti-pressure, anti-quake and anti-impact all meet the national standard.
● Sound insulation
Good sound insulation, sound absorption and noise reduction functions. For example, the amount of sound insulation is up to 40dB with the 90mm thickness of the EPS concrete sandwich wall panel, which is 2 or 3 times than the traditional wall.
● Simple construction, high efficiency
Completely dry work, fabricated construction. The materials can be freely cut according to requirement . During the construction of transportation concise, pile up, no need of mortal health file, greatly reduction the time duration, and the calibration material, reducing the low construction waste. Easily transported, clearly stack and no mortar batch file largely shorten the construction period. Besides, the construction waste can be reduced by the lowly loss rate. Save time and cost 3 times than traditional brick.
● Heat preservation
mainly are made from environmental protection and energy saving heat insulation material. With a good heat insulation and preservation function, it can keep the indoor temperature at a stable range and make the environment much more comfortable.
● Spiking and stickability
The wall material board can be nailed directly or install expansion bolt to hang heavy loads. The single point of hanging strength is above 45kg. The surface of the board can be covered by ceramic tile, wall paper, wood panel and other materials due to the smooth and ash-free features.
● Reusable and user-friendly
The wall board can be reused in the movable interior wall such as supermarket, office, etc. The lightweight energy-saving wall board can be reusable. Dismounting and installation are simple and improved usage rate and economy saving. Also it has no construction waste and no affect other people's normal work.
Applications
● all kind of buildings external wall, internal wall. Roof system, Floor, Slab.
Two floors house with steel structure
http://www.ojdgroup.com/
Company Profile
